Minecraft:Density function: Difference between revisions

Latest revision as of 11:04, 2 August 2026

Template:Exclusive Density functions make up mathematical expressions to obtain a number from a position, stored as Minecraft:JSON files within a Minecraft:data pack in the path data/<namespace>/worldgen/density_function. They are referenced from the Minecraft:noise router in Minecraft:noise settings.

Template:TOC

JSON format

A density function can be a constant number or an object.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type.
- Other additional fields depend on the value of Template:Nbt, described below.

If the Template:Nbt is constant, a shorthand format is:

Template:Nbt: A constant number. Value between −1000000.0 and 1000000.0 (both inclusive).

Marker functions

Template:Cd

Only computes the input density once per horizontal position.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, cache_2d).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input to be cached.

Template:Cd

Used by the game onto final_density and should not be referenced in data packs.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, cache_all_in_cell).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input to be cached.

Template:Cd

If this density function is referenced twice, it is only computed once per block position.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, cache_once).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input to be cached.

Template:Cd

Calculate the value per 4×4 column (Value at each block in one column is the same). And it is calculated only once per column, at Y=0. Used often in combination with interpolated.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, flat_cache).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input to be cached.

Template:Cd

Interpolates at each block in one cell based on the input density function value of some cells around. The size of each cell is size_horizontal * 4 and size_vertical * 4. Used often in combination with flat_cache.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, interpolated).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input to be interpolated.

Noise sampling functions

These density functions are used to sample noises.

Template:Cd

Samples a noise.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, noise).
- Template:Nbt: Template:Json ref — The noise to sample.
- Template:Nbt: Scales the X and Z before sampling.
- Template:Nbt: Scales the Y before sampling.

Template:Cd

Samples a legacy noise. Template:Info needed

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, old_blended_noise).
- Template:Nbt: Value between 0.001 and 1000.0 (both inclusive).
- Template:Nbt: Value between 0.001 and 1000.0 (both inclusive).
- Template:Nbt: Value between 0.001 and 1000.0 (both inclusive).
- Template:Nbt: Value between 0.001 and 1000.0 (both inclusive).
- Template:Nbt: Value between 1.0 and 8.0 (both inclusive).

Template:Cd

Samples a noise at (x/4, y/4, z/4), then multiplies it by 4.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, shift).
- Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref — The noise to sample.

Template:Cd

Samples a noise at (x/4, 0, z/4), then multiplies it by 4.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, shift_a).
- Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref — The noise to sample.

Template:Cd

Samples a noise at (z/4, x/4, 0), then multiplies it by 4.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, shift_b).
- Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref — The noise to sample.

Template:Cd

Similar to noise, but first shifts the input coordinates.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, shifted_noise).
- Template:Nbt: Template:Json ref — The noise to sample.
- Template:Nbt: Scales the X and Z before sampling.
- Template:Nbt: Scales the Y before sampling.
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — offset of the position in the X direction.
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — offset of the position in the Y direction.
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — offset of the position in the Z direction.

Mathematical density functions

These density functions are used to perform mathematical operations.

Template:Cd

Calculates the absolute value of the input density function.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, abs).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Adds two density functions together.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, add).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The first input of the calculation.
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The second input of the calculation.

Template:Cd

Rounds the input value to positive infinity.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, ceil).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to round.
- Template:Nbt Template:Nbt Template:Nbt: The output will be rounded to an integer multiple of the value returned by this Density Function. If not specified, defaults to a constant 1.

Template:Cd

Clamps the input between two values.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, clamp).
- Template:Nbt Template:Nbt Template:Nbt: One density function — The input to clamp.
- Template:Nbt: The lower bound. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt: The upper bound. Value between −1000000.0 and 1000000.0 (both inclusive).

Template:Cd

A constant value.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, constant).
- Template:Nbt Template:Until / Template:Nbt Template:Upcoming: A constant value. Value between −1000000.0 and 1000000.0 (both inclusive).

Template:Cd

Cubes the input (x^3).

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, cube).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Performs division between two arguments.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, div).
- Template:Nbt Template:Nbt Template:Nbt — The left-hand side of the operation.
- Template:Nbt Template:Nbt Template:Nbt — The right-hand side of the operation.

Template:Cd

Rounds the input value to negative infinity.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, floor).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to round.
- Template:Nbt Template:Nbt Template:Nbt: The output will be rounded to an integer multiple of the value returned by this Density Function. If not specified, defaults to a constant 1.

Template:Cd

Renamed to Template:Cd.Template:Upcoming Inverts the input (1/x).

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, invertTemplate:Until / reciprocalTemplate:Upcoming).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — The input of the calculation.

Template:Cd

Computes the natural logarithm of the given input.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, log).
- Template:Nbt Template:Nbt Template:Nbt: Density Function for which to compute the natural logarithm.

Template:Cd

Multiplies two inputs.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, mul).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The first input of the calculation.
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The second input of the calculation.

Template:Cd

Returns the minimum of two inputs.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, min).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The first input of the calculation.
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The second input of the calculation.

Template:Cd

Returns the maximum of two inputs.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, max).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The first input of the calculation.
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The second input of the calculation.

Template:Cd

Negates the input.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, negate).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to negate.

Template:Cd

Raises the given base value to an exponent.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, pow).
- Template:Nbt Template:Nbt Template:Nbt: the base value (Density Function).
- Template:Nbt Template:Nbt Template:Nbt: the exponent (Density Function).

Template:Cd

Rounds the input value to to the nearest integer (ties round up).Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, round).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to round.
- Template:Nbt Template:Nbt Template:Nbt: The output will be rounded to an integer multiple of the value returned by this Density Function. If not specified, defaults to a constant 1.

Template:Cd

Performs subtraction between two arguments.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, sub).
- Template:Nbt Template:Nbt Template:Nbt — The left-hand side of the operation.
- Template:Nbt Template:Nbt Template:Nbt — The right-hand side of the operation.

Template:Cd

Computes the sign of the given input. If positive, it returns as 1. If the input is 0, it returns 0. If negative, it returns as -1.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, sign).
- Template:Nbt Template:Nbt Template:Nbt: Density Function for which to compute the sign.

Template:Cd

Computes the square root of the given input.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, sqrt).
- Template:Nbt Template:Nbt Template:Nbt: Density Function for which to compute the square root.

Template:Cd

Squares the input. (x^2)

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, square).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Rounds the input value to 0.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, truncate).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to round.
- Template:Nbt Template:Nbt Template:Nbt: The output will be rounded to an integer multiple of the value returned by this Density Function. If not specified, defaults to a constant 1.

Mapped density functions

These density functions map a set of values onto another set of values.

Template:Cd

File:Gradient tiling.png

Demonstration of the different tiling options for the Template:Cd density functionTemplate:Upcoming, using both an input range of -100 to 100 and an output range of -1 to 1.

Clamps the given coordinate and maps the gradient to a range.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, gradient).
- Template:Nbt: Template:Cd, Template:Cd. or Template:Cd: The axis over which to define the gradient .
- Template:Nbt: How the density function handles values outside the specified coordinate range. 3 options:
  - clamp_to_edge: outside the gradient boundaries, the value at the nearest boundary will be used.
  - repeat: The gradient will be repeated outside its boundaries.
  - mirrored_repeat: The gradient will be repeated as such that odd repetitions are mirrored, ensuring continuity between repetitions.
- Template:Nbt Template:Upcoming: The coordinate at which the gradient starts.
- Template:Nbt: The coordinate at which the gradient ends. It must not equal Template:Cd.
- Template:Nbt: The value at which the gradient starts.
- Template:Nbt: The value at which the gradient ends.

Template:Cd

Performs (unclamped) linear interpolation between two arguments based on an alpha.Template:Upcoming The returned value is: first*(1-alpha) + second*alpha

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, lerp).
- Template:Nbt Template:Nbt Template:Nbt: Density function representing the interpolation factor (e.g. 0 = first, 1 = second). Any value outside of Template:Cd will extrapolate.
- Template:Nbt Template:Nbt Template:Nbt: Density Function to use at Template:Cd.
- Template:Nbt Template:Nbt Template:Nbt: Density Function to use at Template:Cd.

Template:Cd

First clamps the input between −1 and 1, then transforms it using x/2 - x*x*x/24.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, squeeze).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Computes a cubic spline.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, spline).
- Template:NbtTemplate:Nbt: The spline. Can be either a number or an object.
  - Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — Input determining the location on the spline.
  - Template:Nbt: (Cannot be empty) List of points of the cubic spline.
    - Template:Nbt: A point of the cubic spline.
      - Template:Nbt: The location of this point.
      - Template:Nbt Template:Nbt: The value of this point. Can be either a number or a spline object.
      - Template:Nbt: The slope at this point.

Template:Cd

Replaced with Template:Cd.Template:Upcoming

Clamps the Y coordinate between from_y and to_y and then linearly maps it to a range.Template:Until

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, y_clamped_gradient).
- Template:Nbt: The value to be mapped to from_value. Value between −4064 and 4062 (both inclusive).
- Template:Nbt: The value to be mapped to to_value. Value between −4064 and 4062 (both inclusive).
- Template:Nbt: The value to map from_y to. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt: The value to map to_y to. Value between −1000000.0 and 1000000.0 (both inclusive).

Conditional density functions

These density functions are used to apply "if-then" logic.

Template:Cd

If the input is negative, returns half of the input. Otherwise returns the input. (x < 0 ? x/2 : x)

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, half_negative).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Selects between a number of density functions based on an input density function and a set of threshold values.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, interval_select).
- Template:Nbt Template:Nbt Template:Nbt: Density Function to be compared with any given Template:Cd.
- Template:Nbt: (List of Floats) The threshold values to compare Template:Cd with.
  - If the input value is less than the threshold values, the result of Template:Cd will be selected.
  - If the input value is greater than the last threshold value, the last function will be selected.
  - There must be one fewer Template:Cd than Template:Cd.
- Template:Nbt: The resulting functions (at least two) to be selected from.
  - There must be one more element in Template:Cd than Template:Cd.

Template:Cd

If the input is negative, returns a quarter of the input. Otherwise returns the input. (x < 0 ? x/4 : x)

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, quarter_negative).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The input of the calculation.

Template:Cd

Computes the input value, and depending on that result returns one of two other density functions. Basically an if-then-else statement.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, range_choice).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — The value to compare
- Template:Nbt: The lower bound of the range. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt: The upper bound of the range. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — Used when the input is inside the range.
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — Used when the input is outside the range.

Other density functions

Template:Cd

Adds beards for structures (see the terrain_adaptation field in structures). Its value is added to the final_density in noise setting by the game. Should not be referenced in data packs.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, beardifier).

Template:Cd

Used in vanilla for smooth transition to chunks generated in old versions.Template:Info needed

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, blend_alpha).

Template:Cd

Used in vanilla for smooth transition to chunks generated in old versions.Template:Info needed

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, blend_density).
- Template:Nbt Template:Nbt Template:Nbt Template:Until / Template:Nbt Template:Upcoming: Template:Json ref/density function — The desired density of new chunks.

Template:Cd

Used in vanilla for smooth transition to chunks generated in old versions.Template:Info needed

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, blend_offset).

Template:Cd

File:Distance to point options.png

Demonstration of the different metric options for the Template:Cd density functionTemplate:Upcoming, using the distance from the point (0, 0).

Computes the distance to a fixed point using the specified distance function.Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, distance_to_point).
- Template:Nbt: Template:Cd; the point to compute distance to
- Template:Nbt:
  - Template:Nbt: (i.e. Template:Cd)
  - Template:Nbt: (i.e. Template:Cd)
  - Template:Nbt: (i.e. Template:Cd)
  - Template:Nbt: (i.e. Template:Cd)

Template:Cd

Renamed to Template:Cd.Template:Upcoming Samples at current position using a noise algorithm used for end islands. Its minimum value is −0.84375 and its maximum value is 0.5625.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, end_islandsTemplate:Until / end_outer_islandsTemplate:Upcoming).

Template:Cd

Scans through a column of an input density and returns the topmost y-level that is above 0. If no such position exists within the bounds, the Template:Nbt is returned.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, find_top_surface).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — The density function to scan.
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — The y-level to start the scan at. Usually a 2D density function.
- Template:Nbt: The y-level to stop the scan.
- Template:Nbt: The resolution of the scan. E.g. if set to 4, then only every 4th block is checked.

Template:Cd

Removes a dimension from the input domain by taking a "slice" along an axis with a specific coordinate (e.g. with the axis equaling y and the coordinate of 0, a slice will be taken along the XZ plane, with all values sampled at y=0).Template:Upcoming

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, slice).
- Template:Nbt: Template:Cd, Template:Cd, or Template:Cd; the axis to remove.
- Template:Nbt: The fixed coordinate to be passed to the input function.
- Template:Nbt Template:Nbt Template:Nbt: The input function.

Removed density functions

Template:Outdated

Template:Cd

Removed in Minecraft:22w12a

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, slide).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function

The legacy "spline"

Removed in Minecraft:22w11a

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, spline).
- Template:NbtTemplate:Nbt: The spline. Can be either a number or an object.
  - Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function — Input determining the location on the spline.
  - Template:Nbt: (Cannot be empty) List of points of the cubic spline.
    - Template:Nbt: The location of this point.
    - Template:Nbt Template:Nbt: The value of this point. Can be either a number or a spline object.
    - Template:Nbt: The slope at this point.
- Template:Nbt: The min value of the output. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt: The max value of the output. Value between −1000000.0 and 1000000.0 (both inclusive).

Template:Cd

Removed in Minecraft:22w11a

Calculate the spline from the noise settings.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, terrain_shaper_spline).
- Template:Nbt: Can be offset, factor, orjaggedness.
- Template:Nbt: The min value of the output. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt: The max value of the output. Value between −1000000.0 and 1000000.0 (both inclusive).
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function
- Template:Nbt Template:Nbt Template:Nbt: Template:Json ref/density function

Template:Cd

Removed in Minecraft:26.2-snap5

According to the input value, scales and enhances (or weakens) some regions of the specified noise, and then returns the absolute value.

Template:Nbt: Root object.
- Template:Nbt: The ID of the density function type (in this case, weird_scaled_sampler).
- Template:Nbt: Can be type_1（The minimum scale is 0.75, and the maximum is 2.0）or type_2（The minimum scale is 0.5, and the maximum is 3.0.)
- Template:Nbt: Template:Json ref — The noise to sample.
- Template:Nbt Template:Nbt Template:Nbt: The input density function. Can be an ID of a density function, or a density function in the form of a JSON object or a constant number.

History

Template:HistoryTable

Issues

Template:Issue list

References

Template:Reflist

External links

Density Function Generator on misode.github.io

Navigation

Template:Navbox Java Edition technical

Minecraft:de:Dichtefunktion Minecraft:fr:Fonction de densité Minecraft:ko:밀도 함수 Minecraft:pt:Função de densidade Minecraft:zh:密度函数

@@ Line 150: / Line 150: @@
 ** {{nbt|string}}{{nbt|double}}{{nbt|compound|input}}: Density Function to round.
 ** {{nbt|string}}{{nbt|double}}{{nbt|compound|multiple}}: The output will be rounded to an integer multiple of the value returned by this Density Function. If not specified, defaults to a constant 1.
+</div>
+=== {{cd|clamp}} ===
+Clamps the input between two values.
+<div class="treeview">
+* {{nbt|compound}}: Root object.
+** {{Nbt|string|type}}: The ID of the density function type (in this case, <code>clamp</code>).
+** {{nbt|string}}{{nbt|double}}{{nbt|compound|input}}: One density function &mdash; The input to clamp.
+** {{Nbt|double|min}}: The lower bound. Value between −1000000.0 and 1000000.0 (both inclusive).
+** {{Nbt|double|max}}: The upper bound. Value between −1000000.0 and 1000000.0 (both inclusive).
 </div>
@@ Line 307: / Line 317: @@
 == Mapped density functions ==
 These density functions map a set of values onto another set of values.
-=== {{cd|clamp}} ===
-Clamps the input between two values.
-<div class="treeview">
-* {{nbt|compound}}: Root object.
-** {{Nbt|string|type}}: The ID of the density function type (in this case, <code>clamp</code>).
-** {{Nbt|double}}{{Nbt|compound|input}}: One '''density function''' (a new {{Nbt|double}}{{Nbt|compound}} density function definition, an {{Nbt|string|}}[[Minecraft:resource location|ID]] is not allowed here<ref>{{cite bug|MC|252814|Clamp density function takes a direct input and doesn't allow a reference|date=June 11, 2022}}</ref>) &mdash; The input to clamp.
-** {{Nbt|double|min}}: The lower bound. Value between −1000000.0 and 1000000.0 (both inclusive).
-** {{Nbt|double|max}}: The upper bound. Value between −1000000.0 and 1000000.0 (both inclusive).
-</div>
 === {{cd|gradient}} ===
-[[File:Gradient tiling.png|thumb|Demonstration of the different tiling options for the {{cd|gradient}} density function{{upcoming|JE 26.3}}, using both an input and output range of -1 to 1.]]
+[[File:Gradient tiling.png|thumb|Demonstration of the different tiling options for the {{cd|gradient}} density function{{upcoming|JE 26.3}}, using both an input range of -100 to 100 and an output range of -1 to 1.]]
 Clamps the given coordinate and maps the gradient to a range.{{upcoming|JE 26.3}}
 <div class="treeview">
@@ Line 456: / Line 456: @@
 === {{cd|distance_to_point}} ===
+[[File:Distance to point options.png|thumb|Demonstration of the different metric options for the {{cd|distance_to_point}} density function{{upcoming|JE 26.3}}, using the distance from the point (0, 0).]]
 Computes the distance to a fixed point using the specified distance function.{{upcoming|JE 26.3}}
@@ Line 581: / Line 582: @@
 Added fields to {{cd|old_blended_noise}} density function: xz_scale, y_scale, xz_factor, y_factor, and smear_scale_multiplier.}}
 |{{HistoryLine||1.21.9|dev=25w31a|Added density functions {{cd|minecraft:find_top_surface}} and {{cd|minecraft:invert}}.}}
-|{{HistoryLine||26.2|dev=snap5|Added density function {{cd|minecraft:interval_select}}.|Removed density function {{cd|minecraft:weird_scale_sampler}}. Its functionality has been replaced with {{cd|interval_select}}.}}
+|{{HistoryLine||26.2|dev=snap1|Density function {{cd|minecraft:clamp}} can now take a density function ID as an input.}}
+|{{HistoryLine|||dev=snap5|Added density function {{cd|minecraft:interval_select}}.|Removed density function {{cd|minecraft:weird_scale_sampler}}. Its functionality has been replaced with {{cd|interval_select}}.}}
 |{{HistoryLine|java upcoming}}
 |{{HistoryLine||26.3|dev=snap4|Added the following density functions: