Minecraft:Jungle Tree

Jungle trees are Minecraft:trees native to the Minecraft:jungle biomes. Jungle trees range from short bushes to tall trees that reach up to 31 blocks in height. Their wood is of a pale brownish color.

Appearance

Jungle trees come in several different variants with different properties:

• Regular jungle trees are short, lack branches, and have a 1×1 trunk, which can extend up to 10 blocks tall. Only the top of the trunk is covered in Minecraft:leaves.
  • All naturally generating jungle trees are covered in Minecraft:vines, both on their trunk and exposed leaves. Minecraft:Cocoa pods occasionally generate on the sides.
  • All jungle trees grown from Minecraft:saplings are not covered in vines and cocoa pods, but they can grow as Minecraft:tree with vines Template:In.
• Mega jungle trees grow branches (logs connected horizontally, vertically or diagonally to the trunk or other branches). Most of the time, a single tree has between one and six branches, and each branch has between one and six Minecraft:logs. The trunk covers a 2×2 space on the ground.

Fallen jungle trees

Fallen jungle trees replace regular jungle trees in any biome where they can generate (meaning that they do not generate in Minecraft:bamboo jungles).

A fallen jungle tree may consist of a single upright log, or a stump. Logs lying on their side are often found 1–2 blocks from the stump. They occasionally have mushrooms on top.

A fallen jungle tree has a log length of 4–11 blocks. Minecraft:Vines cover 75% of the stump.

Jungle trees with vines

Some undecorated jungle trees may be covered with Minecraft:vines on all exposed logs; undecorated jungle trees can only be grown with saplings.

Generation

File:Jungle from below.png

Jungle trees in a jungle

The jungle tree variants generate naturally in the indicated biomes, ordered in density:

Biome	File:Jungle Tree.png Jungle Tree	File:Mega Jungle Tree.png Mega Jungle Tree	width=25x25 Fallen Jungle Tree
Template:BiomeLink	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLinkTemplate:Only	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLink	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLinkTemplate:Only	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLinkTemplate:Only	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLink	Template:Tc	Template:Tc	Template:Tc
Template:BiomeLinkTemplate:Only	Template:Tc	Template:Tc	Template:Tc

A large jungle tree always generates with Minecraft:dirt under its trunk, even if it spawns partly or wholly over Minecraft:air or Minecraft:water blocks.

Planting

Jungle tree Minecraft:saplings can be planted on:

• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink
• Template:BlockLink

File:Jungletree growth.png

This jungle tree cannot grow because of the red wool block (looking from the northwestern corner)

When planted in grass or dirt, a jungle sapling grows into a jungle tree with a 1×1 trunk, but the Minecraft:player can place saplings in a 2×2 formation and they grow into a jungle tree with the 2×2 trunk found naturally in the jungle biome.

1×1 jungle trees require a 3×3 column of unobstructed space at least 5 blocks above the sapling to grow (6 blocks including the sapling itself). Additionally, 1×1 jungle trees require 5×5 layers without obstruction for the top 3 layers of its final height. No horizontal clearance is needed at the base of the tree (a sapling planted in a hole 1 block deep still grows).

In order to grow a 2×2 jungle tree, four saplings must be placed adjacent to each other in a square. For growth to succeed, there must be no blocks adjacent (even diagonally) to the north-western side up to the final height of the tree. Minecraft:Bone meal can be used on any of the saplings to accelerate growth.

2×2 jungle trees require a 5×5 column of unobstructed space at least 11 blocks above the saplings to grow (12 blocks including the saplings themselves). This column is centered on the northwestern sapling. A 3×3 area is required at the base of the tree (the level of the saplings). They can grow up to 32 blocks high.

If planted by the player, 1×1 jungle trees do not generate with vines, while 2×2 jungle trees do. 2×2 jungle trees cannot grow side by side because the vines break the space clearance requirement.

Data values

ID

Template:JE: Template:ID table Template:ID table Template:ID table

Template:BE: Template:ID table Template:ID table Template:ID table Template:ID table Template:ID table

History

Gallery

Screenshots

• A group of mega jungle trees in a bamboo jungle
  A group of mega jungle trees in a bamboo jungle
• Some small jungle trees in the sparse jungle
  Some small jungle trees in the sparse jungle
• A fallen jungle tree
  A fallen jungle tree
• Dry-colored jungle trees on the edge of a windswept savanna
  Dry-colored jungle trees on the edge of a windswept savanna
• Some jungle trees in the entrance of lush caves
  Some jungle trees in the entrance of lush caves
• A jungle biome with shattered terrain, with tall trees on the mountain peaks
  A jungle biome with shattered terrain, with tall trees on the mountain peaks
• The undecorated jungle trees that can only be grown from saplings
  The undecorated jungle trees that can only be grown from saplings
• A jungle tree in Minecraft:snowfall in Bedrock Edition
  A jungle tree in Minecraft:snowfall in Bedrock Edition
• All 2×2 trees in Minecraft
  All 2×2 trees in Minecraft

Mojang images

• The first image of a jungle biome with jungle trees
  The first image of a jungle biome with jungle trees
• A jungle tree on a tiny floating island above another jungle tree on top of a mountain
  A jungle tree on a tiny floating island above another jungle tree on top of a mountain