Minecraft:Sulfur Cube
More actions
Template:In development Template:Infobox entity
A sulfur cube is a bucketable jumping Minecraft:passive mob found in Minecraft:sulfur caves. It can absorb a full-sized Minecraft:block into itself, which immobilizes it and makes it receive higher knockback from most attacks instead of damage. The block type a sulfur cube absorbs affects its physical properties, and some blocks cannot be absorbed. Blocks can be extracted using Minecraft:shears, or by killing the sulfur cube.
Small sulfur cubes spawn in groups of two when a large sulfur cube dies. They grow up over time similarly to Minecraft:babies and cannot absorb blocks.
Spawning
Large sulfur cubes spawn naturally in Minecraft:sulfur caves at light level 0.
Two small sulfur cubes spawn when a large sulfur cube dies, which can then grow up into large sulfur cubes; see Template:Section link below.
Despite being passive mobs, sulfur cubes cannot spawn in Minecraft:Peaceful difficulty,Template:Only<ref>Template:Bug</ref> as they count as Minecraft:monsters.
Behavior
Sulfur cubes are passive mobs that, by default, jump around aimlessly. In this state, they are susceptible to all sources of damage.
If a sulfur cube Minecraft:pathfinds into a block which can be Minecraft:climbed, such as Minecraft:ladders or Minecraft:vines, the sulfur cube will climb the block. Sulfur cubes with absorbed blocks which are launched are also capable of climbing.Template:Only
Splitting
Sulfur cubes come in two sizes: small and large. When a large sulfur cube dies, it splits into two small cubes. If a small sulfur cube dies, it does not split and drops nothing. When a named large sulfur cube is killed and splits, both small cubes retain the name.
Small sulfur cubes grow into large ones after 20 minutes, similarly to Minecraft:baby mobs. Minecraft:Slimeballs can be used to tempt and feed small sulfur cubes, which will decrease their remaining growth time. They can also be fed a Minecraft:golden dandelion to prevent them from growing.
Absorbing blocks
Large sulfur cubes have the ability to absorb some Minecraft:blocks, mostly full-sized ones. It can absorb a block dropped on the ground, and also can be fed a block by Template:Control with it. Sulfur cubes move toward absorbable blocks dropped on the ground, and also follow players holding an applicable block in their hand. Small sulfur cubes cannot absorb blocks. A Minecraft:dispenser can also be used to make a sulfur cube absorb a block.
Any method of feeding a block to a sulfur cube can also be done on a sulfur cube that has already absorbed a block, which changes the block inside it and drops its previously-absorbed block as an item.
When a sulfur cube has absorbed a block, it stops moving and its absorbed block is visible inside of it. The absorbed block can be removed from a sulfur cube by using Minecraft:shears on it, which drops the block as an item.
Sulfur cubes in Minecraft:boats and Minecraft:minecarts can still absorb blocks dropped on the ground. Shears in a Minecraft:dispenser can be used to remove the block from the sulfur cube while it is still in the boat or minecart.
Absorbed blocks in sulfur cubes have the same visual properties as when placed down, including MERS textures with Minecraft:Vibrant Visuals. Froglights, for example, glow inside the sulfur cube, but they do not actually light the environment gameplay-wise. Throwing a Minecraft:splash potion of Invisibility on a sulfur cube will show only the absorbed block.
Sulfur cubes can absorb named blocks; the block will remain named if removed, but the name tag will not display above the sulfur cube.
Sulfur cubes can only absorb the specific blocks listed in the Template:Section link section.
Item interactions
A large sulfur cube can be picked up by using an empty Minecraft:bucket on it to create a Minecraft:bucket of sulfur cube. If a named sulfur cube is bucketed, the name of the item becomes "Bucket of <name>" (the sulfur cube's name).
If the bucketed sulfur cube has an absorbed block, the bucket of sulfur cube item tooltip displays the name of the absorbed block, unless the sulfur cube is also named.
Damage resistance
A sulfur cube that has absorbed a block is resistant to the following forms of damage:
- Minecraft:Melee attacks
- Minecraft:Projectiles
- Minecraft:Falling blocks, including Minecraft:anvils and Minecraft:stalactites
- Minecraft:ExplosionsTemplate:Only
- Minecraft:Fall damage, including onto Minecraft:stalagmites
- Minecraft:Freezing
- Contact with Minecraft:cactus or Minecraft:sweet berry bushes
Other sources of damage, such as Minecraft:fire, Minecraft:suffocation, Minecraft:cramming or Minecraft:poison, can damage or kill the sulfur cube as normal.
Some hostile mobs will attack the sulfur cube even while it has absorbed a block, such as Minecraft:zoglins, the Minecraft:wither and Minecraft:wardens. Although the sulfur cube is immune to the warden's melee damage, they can be killed by its Minecraft:sonic boom. Additionally, tamed Minecraft:wolves will attack a sulfur cube which their owner attacks.
Launching
When affected by knockback, the sulfur cube is launched and may bounce like a ball. The direction and trajectory in which a sulfur cube is launched are dependent on where on its body it is hit.Template:Needs testing
The force at which a sulfur cube is launched is based on the amount of damage the attack does. For example, hitting it with a Minecraft:diamond sword (Template:Hp Template:In or Template:Hp Template:In) launches it farther than punching it without an item (Template:Hp).
Depending on the absorbed block, the sulfur cube exhibits different properties when hit.
Archetypes
| Archetype | Block | Description | Minecraft:Attribute values |
|---|---|---|---|
| Rubber Ball/Bouncy | Template:Flatlist | Makes it very bouncy. | Knockback resistance: -2.0 Bounciness: 0.9 Friction modifier: 0.3 Air drag modifier: 0.01 |
| Golf Ball/Fast Flat | Template:Flatlist | Makes it bounce less and slide more often. Sinks in water. | Knockback resistance: -2.0 Bounciness: 0.2 Friction modifier: 0.1 Air drag modifier: 0.01 |
| Hockey Puck/Fast Sliding | Template:Flatlist | Makes it able to slide, but unable to bounce. Sinks in water. | Knockback resistance: 0.5 Bounciness: 0.1 Friction modifier: 0.05 Air drag modifier: 0.01 |
| High Resistance | Template:Flatlist | Makes it very hard to push and unable to bounce. Sinks in water. | Knockback resistance: 0.7 Bounciness: 0.2 Friction modifier: 1 Air drag modifier: 0.01 |
| Beach Ball/Light | Template:BlockLink | Gives it lower gravity, making it floaty. | Knockback resistance: -1.0 Bounciness: 1.0 Friction modifier: 0.3 Air drag modifier: 1.8 |
| Medicine Ball/Slow Flat | Template:Flatlist | Gives it higher gravity, making it heavy. Sinks in water. | Knockback resistance: 0.7 Bounciness: 0.2 Friction modifier: 0.3 Air drag modifier: 0.1 |
| Curling Stone/Slow Sliding | Template:Flatlist | Makes it slide slow and unable to bounce. Sinks in water. | Knockback resistance: 0.8 Bounciness: 0.1 Friction modifier: 0.05 Air drag modifier: 0.01 |
| Sticky | Template:BlockLink | Makes it unable to slide or bounce. | Knockback resistance: -2.0 Bounciness: 0.0 Friction modifier: 2.0 Air drag modifier: 0.01 |
| Football/Regular | Template:Collapse | Makes it slide and bounce often. | Knockback resistance: -1.0 Bounciness: 0.5 Friction modifier: 0.3 Air drag modifier: 0.1 |
Template:Fnlist If a sulfur cube with a block dies, it drops the block as an item in addition to splitting.
Sounds
Mob
Big
Template:Edition: Template:SoundTable
Small
Template:Edition: Template:SoundTable
Ball
Data values
ID
Template:Edition: Template:ID table
Template:Edition: Template:ID table
Entity data
Template:Expand section Template:El: Template:Main
<section begin="entity data" />
- Template:Nbt Entity data
- Template:Nbt inherit/entity
- Template:Nbt inherit/mob
- Template:Nbt: The size of the sulfur cube. Note that this value is zero-based, so 0 is the smallest slime, 1 is the next smallest, etc. The sizes that spawn naturally are 0 and 1. Values that are greater than 126 get clamped to 126.
- Template:Nbt: 1 or 0 (true/false) - 1 if the sulfur cube is touching the ground, 0 if not.
- Template:Nbt: 1 or 0 (true/false) - 1 if the sulfur cube was spawned by using a Minecraft:Bucket of Sulfur Cube, 0 if not.
The absorbed block (if any) is stored in equipment.body.
- Template:Nbt: The entity's root tag.
- Template:Bedrock nbt
- Template:Bedrock nbt
- Template:Bedrock nbt
- Template:Bedrock nbt
- Template:Nbt: The size of the sulfur cube. 1 is the smallest slime, 2 is the next larger.
- Template:Nbt: List of equipment slots and the chance that the item in that slot drops when the sulfur cube dies.
- Template:Nbt: A slot entry.
- Template:Nbt: The probability that the item in this slot will drop (0.0 to 1.0).
- Template:Nbt: The name of the equipment slot. Can be Template:Cd in sulfur cube.
- Template:Nbt: A slot entry.
- Template:Nbt: The sulfur cube
properties.- Template:Nbt: Template:Nbt boolean - Template:Cd if the sulfur cube it has a block.
<section end="entity data" />
Videos
History
Announcement
Java Edition
Bedrock Edition
Issues
Trivia
- A simplified version of the front texture of the sulfur cube is depicted on the Minecraft:chiseled sulfur block.
- Prior to sulfur cubes, the idea of Minecraft:slimes being used as a ball appeared as a brief visual gag in Minecraft:Village & Pillage: Official Trailer.
- In the first Minecraft:Bedrock Edition Preview, the golf ball archetype would cause the cube to stick to ceilings.
Gallery
Renders
- Java Edition
-
A sulfur cube that has absorbed an oak log
-
A sulfur cube that has absorbed a moss block
-
A sulfur cube that has absorbed ice
-
A sulfur cube that has absorbed soul sand
-
A sulfur cube that has absorbed white wool
-
A sulfur cube that has absorbed a block of iron
-
A sulfur cube that has absorbed a red mushroom block
-
A sulfur cube that has absorbed honeycomb
-
A sulfur cube that has absorbed stone
-
A sulfur cube without its inner layer (this state cannot be seen in-game)
-
A sulfur cube without its outer layer (this state cannot be seen in-game)
- Bedrock Edition
-
A sulfur cube that has absorbed an oak log
-
A sulfur cube that has absorbed a moss block
-
A sulfur cube that has absorbed ice
-
A sulfur cube that has absorbed soul sand
-
A sulfur cube that has absorbed white wool
-
A sulfur cube that has absorbed a block of iron
-
A sulfur cube that has absorbed a red mushroom block
-
A sulfur cube that has absorbed honeycomb
-
A sulfur cube that has absorbed stone
-
What the unused small sulfur cube texture looks like when mapped
-
A sulfur cube without its inner layer (this state cannot be seen in-game)
-
A sulfur cube without its outer layer (this state cannot be seen in-game)
-
A baby sulfur cube without its inner layer (this state cannot be seen in-game)
-
A baby sulfur cube without its outer layer (this state cannot be seen in-game)
Textures
-
Inner texture
-
Outer texture Template:In
-
Outer texture Template:In
-
Small sulfur cube texture Template:In
Minecraft Live screenshots
-
A sulfur cube jumping
-
A sulfur cube next to Minecraft:Kai
-
A sulfur cube with a Minecraft:pumpkin inside of it in mid air
-
A sulfur cube with a Minecraft:stone block inside of it
-
A sulfur cube with a Minecraft:crimson hyphae inside of it
-
A cage full of sulfur cubes
-
A sulfur cube with a Minecraft:sea lantern inside of it
-
A sulfur cube with a Minecraft:birch log inside of it
-
A sulfur cube with Minecraft:jungle wood inside of it
References
Template:Navbox new content Template:Navbox entities
Minecraft:de:Schwefelwürfel Minecraft:es:Cubo de azufre Minecraft:fr:Cube de soufre Minecraft:it:Cubo di zolfo Minecraft:ja:Sulfur Cube Minecraft:ko:유황 큐브 Minecraft:pt:Cubo de Enxofre Minecraft:ru:Серный куб Minecraft:th:Sulfur Cube Minecraft:zh:Sulfur Cube