Minecraft:Terrain features

This page lists terrain features that are created as part of the Minecraft:world generation.

Overworld

General terrain generation

Template:Main The surface in the Overworld is generated using 3D Perlin noise, which creates pseudo-random variation. More variation is created by three noise paramters: continentalness, erosion, and peaks and valleys. These are also tied to Minecraft:biome placement.

Some features created by this algorithm include:

Hills and lakes

Hills in the game can vary from gradual slopes to steep cliffs. They can occur anywhere in the world, including oceans, flatland, or mountains. Hills in an ocean biome can reach high enough to create islands. Similarly, terrain variation can also cause holes and pits, sometimes forming lakes. On an Minecraft:amplified world, hills in most biomes are often extended and form extreme cliffs.

Higher erosion values often result in more "windswept" hills with steep cliffs and generally lower altitudes. At lower erosion, hills are smooth or almost flat, but the terrain can reach much higher elevation.

• Hilly terrain in the windswept gravelly hills biome
  Hilly terrain in the windswept gravelly hills biome
• Smoother hills in the Minecraft:plains biome
  Smoother hills in the Minecraft:plains biome
• Flatland with some hills in snowy plains
  Flatland with some hills in snowy plains
• Underwater, hills and cliffs may also occur
  Underwater, hills and cliffs may also occur

Mountains and valleys

When the erosion value reaches lower values, peaks and valleys start to contribute more to the terrain variation. The general altitude depends on the continentalness.

Minecraft:Mountains are high elevation terrain that have jagged peaks and higher land. Mountainous terrain often includes valleys, slopes, cliffs, and peaks. Sometimes, mountains reach the terrain generation limit of Y=256, where they are cut off and form flat plateaus combined with rugged terrain.

In contrast to windswept hills, however, mountains and valleys are smoothly shaped with rolling hills. Plateaus occur at slightly higher erosion or lower continentalness, which are similar to mountains but flattened at around Y=130. More inland, both mountains, valleys, and plateaus can stretch over huge areas with much higher elevation. At the border of different terrain types, steep slopes or cliffs form.

Common terrain features created by peaks and valleys (weirdness) are mountain rings. Mountain peaks or plateaus can enclose lower valleys, although they are sometimes incomplete. When the weirdness reaches extreme values, these valleys can reach extreme depths and form craters, sometimes reaching the bottom Minecraft:bedrock layers. When this occurs, stone walls more than a hundred blocks tall are formed to separate the water from the lava above the bedrock.

The peaks and valleys noise usually creates Minecraft:rivers between mountains or plateaus. Depending on the continentalness, these vary in width and depth. High-erosion terrain like Minecraft:swamps can also be affected, but oceans and mushroom fields are not.

• A typical jagged peaks mountain ring
  A typical jagged peaks mountain ring
• The rare occurrence of a massive "crater lake" reaching the bedrock
  The rare occurrence of a massive "crater lake" reaching the bedrock
• Mountains reaching the terain generation limit, along with smooth valleys
  Mountains reaching the terain generation limit, along with smooth valleys
• A savanna plateau
  A savanna plateau
• Many rivers in hilly terrain
  Many rivers in hilly terrain

Cliff

Template:Confuse Oceanic cliffs are steep vertical slopes that can sometimes generate when mountainous terrain borders an Minecraft:ocean. Oceans near cliffs are often deep and sometimes small. The cliffs expose many Minecraft:caves, while the surface terrain ends abruptly.

• A frozen cliff
  A frozen cliff
• A long taiga cliff
  A long taiga cliff
• A cliff shaped like a crater
  A cliff shaped like a crater
• An island made of cliffs
  An island made of cliffs
• Oceanic cliffs in front of each other
  Oceanic cliffs in front of each other

Fjord

Template:Redirect Fjords happen when rivers cut through high-medium elevation terrain. Rivers are deeper here than usual.

• A badlands fjord.
• File:Fjord 2.png
• File:Fjord 1.png

Floating island

Floating islands are structures that float in mid-air. Floating islands are normally just small chunks of floating Minecraft:dirt and Minecraft:stone found near cliffs, but on rare occasions they can be large structures that even have springs and Minecraft:trees on them. Floating islands are most frequently found in or near Minecraft:windswept hills biomes and their variants, as well as Minecraft:windswept savannas.

Floating islands and overhangs are common when the erosion is high, but not at its maximum. This results in windswept terrain often surrounding Minecraft:swamps, with flatland terrain nearby.

• A small floating island.
  A small floating island.
• It is rarer to see large floating islands, especially those with natural features such as trees.
  It is rarer to see large floating islands, especially those with natural features such as trees.
• A floating island in a forest biome with a few trees growing on it.
  A floating island in a forest biome with a few trees growing on it.
• A tree on a snowy floating island.
  A tree on a snowy floating island.
• The windswept savanna is notable for its massive overhangs and floating islands
  The windswept savanna is notable for its massive overhangs and floating islands

Sea level

Minecraft:Air on Minecraft:altitude Y=62 and lower is replaced by Minecraft:water. This occurs mostly in river and ocean biomes – areas in the terrain generation with low continentalness or peaks and valleys – and can form massive, deep water bodies. The sea level can also create lakes in land biomes, or fill deep craters.

Below Y=-55, all air is replaced by Minecraft:lava, forming a similar "lava level". This mostly applies to caves, as the terrain rarely reaches such depths.

• The ocean is the largest example of the sea level.
  The ocean is the largest example of the sea level.
• A river, connected to some flooded land biomes
  A river, connected to some flooded land biomes
• Lakes are common in the windswept savanna biome
  Lakes are common in the windswept savanna biome
• The underground lava sea
  The underground lava sea

Surface

Template:For Based on the depth value calculated by the terrain generation, Minecraft:water exposure, the Minecraft:biome, and the Minecraft:dimension, the world is "filled" with several blocks in layers. The top layer is always defined, and the following layers are determined by a surface depth noise, roughly 5 blocks deep.

Terrain

All blocks that make up the terrain are placed depending on the dimension and altitude. In the Overworld, this is as follows:

• Template:BlockLink: Template:IN, one full layer at Y=-64, followed by a randomized gradient that places bedrock up to layer Y=-59. Template:IN, two full layers at Y=-64 and -63, followed by a noise that randomly places bedrock up to Y=-60, meaning that they cannot generate "floating", and the pattern is always the same regardless of Minecraft:world seed. The bedrock layers cannot be overridden by other terrain features.
• Template:BlockLink generates up to Y=0. Above, a gradient randomly places decreasing amounts of deepslate up to layer Y=8.
• Template:BlockLink generates anywhere else as terrain block.

• The terrain before any surface block placement
  The terrain before any surface block placement
• Stone transitioning into deepslate
  Stone transitioning into deepslate
• A mineshaft exposing the bedrock layers
  A mineshaft exposing the bedrock layers

Surface layers

The uppermost layers of the terrain are converted to a biome-dependent material. The first layer is usually Minecraft:grass blocks, the following few layers are Minecraft:dirt. In shallow water, the first and following layers are always dirt, allowing Minecraft:disks to generate. In deeper water, the first layer is gravel and the following layers are Minecraft:stone. A few biomes override this.

• Template:BiomeSprite In Minecraft:deserts, Minecraft:beaches, and warm oceans,Template:Only the first few layers are Minecraft:sand. A secondary surface depth generates Minecraft:sandstone, reaching deeper in deserts. Except warm oceans,Template:Only this is not applied in deep water.

• Template:BiomeSprite In lukewarm oceans and warm oceans,Template:Only only the first layer in deep water is Minecraft:sand.

• Template:BiomeSprite In ice spikes, the first layer above water is Minecraft:snow blocks.

• Template:BiomeSprite In mushroom fields, the first layer above water is Minecraft:mycelium.

• Template:BiomeSprite In dripstone caves, the first layer above water is Minecraft:stone.

• Template:BiomeSprite In Minecraft:mangrove swamps, the first few layers excluding deep water are Minecraft:mud.
• Template:BiomeSprite In jagged peaks, the first layer above water is Minecraft:snow blocks and the following layers are Minecraft:stone.Template:FnTemplate:Fn

• Template:BiomeSprite Template:IN, in sulfur caves as well as frozen oceans and jagged peaks, below any water, the first few layers are Minecraft:stone.

When gravel or sand generates floating, it gets replaced by Minecraft:stone and Minecraft:sandstone, respectively. The surface layers do not apply to caves, meaning these blocks can still generate floating, and other blocks can be exposed.

• In most biomes, grass blocks cover the land with dirt below and in shallow water, and gravel in deep water
  In most biomes, grass blocks cover the land with dirt below and in shallow water, and gravel in deep water
• The surface in deserts is covered by sand and some sandstone can be exposed on cliffs.
  The surface in deserts is covered by sand and some sandstone can be exposed on cliffs.
• Underwater in a warm ocean, showing one layer of sand
  Underwater in a warm ocean, showing one layer of sand
• Ice spikes have snow blocks instead of grass.
  Ice spikes have snow blocks instead of grass.
• Mushroom fields have mycelium instead of grass
  Mushroom fields have mycelium instead of grass
• The dripstone caves biome replaces grass with stone.
  The dripstone caves biome replaces grass with stone.
• Mangrove swamps have mud both on the floor layers and in shallow water
  Mangrove swamps have mud both on the floor layers and in shallow water

Special surface layersTemplate:Anchor

Template:RedirectThe following biomes have special surface layers, also known as strips. This is created by 2D noise, making blocks appear in varying patches, blobs, and strips.

• Template:BiomeSprite In wooded badlands, above roughly layer 97, coarse dirt and Minecraft:grass blocks alternate as top layer above water.
• Template:BiomeSprite In dappled forests, coarse dirt and grass blocks alternate as top layer above water.Template:Upcoming
• Template:BiomeSprite In old growth taigas, coarse dirt, Minecraft:podzol, and grass blocks alternate as top layer above water.
• Template:BiomeSprite In stony peaks, Minecraft:calcite and Minecraft:stone alternate as the first few layers, not applied in deep water. This forms long strips across the entire biome.
• Template:BiomeSprite In Minecraft:stony shores, Minecraft:gravel and stone alternate similarly, forming strips. Floating gravel is replaced by stone.
• Template:BiomeSprite In Minecraft:groves and snowy slopes,Template:Fn powder snow and Minecraft:snow blocks alternate as the first layer, forming patches of powder snow.Template:Fn
  • In the first layers below, powder snow alternates with Minecraft:dirt in groves or the mountain slopes noise in snowy slopes. This results in powder snow patches reaching depth, while snow blocks cover only the surface.
• Template:BiomeSprite In frozen peaks, Minecraft:ice replaces the top few layers in small blobs. Packed ice generates in larger strips between Minecraft:snow blocks, both in the top few layers.Template:FnTemplate:Fn
• Template:BiomeSprite In windswept hills, as well as frozen oceans Template:In, Minecraft:stone replaces most dirt and grass in the first few layers, making the latter generate in patches.
• Template:BiomeSprite Similarly, in windswept savannas, stone generates in strips in the first few layers. The top grass layer is replaced by coarse dirt in some patches.
• Template:BiomeSprite Windswept gravelly hills use a similar noise to windswept hills but with some Minecraft:gravel alternating in the first few layers. Template:IN, the noise is different and most of the biome is covered in gravel, with a few one-block strips of grass blocks (or dirt in shallow water).

• A strip of calcite in a stony peaks biome
  A strip of calcite in a stony peaks biome
• A strip of gravel in a stony shore biome
  A strip of gravel in a stony shore biome
• Grass strips in gravelly mountains+ in Bedrock Edition
  Grass strips in gravelly mountains+ in Bedrock Edition
• Packed ice strips and ice blobs in frozen peaks
  Packed ice strips and ice blobs in frozen peaks
• Stone, coarse dirt, and grass in the windswept savnna
  Stone, coarse dirt, and grass in the windswept savnna
• Coarse dirt, podzol, and grass in an old growth pine taiga
  Coarse dirt, podzol, and grass in an old growth pine taiga
• Coarse dirt and grass in wooded badlands plateaus, generating only at higher altitudes
  Coarse dirt and grass in wooded badlands plateaus, generating only at higher altitudes
• Coarse dirt and grass in a dappled forest
  Coarse dirt and grass in a dappled forest
• A powder snow patch
  A powder snow patch
• Stone and grass in windswept hills
  Stone and grass in windswept hills

Mountain slopes

The jagged peaks, frozen peaks, and snowy slopes biomes all use a mechanism to determine steep slopes. North and east cliffs replace other blocks in the first few layers with Minecraft:stone, or packed ice in frozen peaks, where only a thin snow layer generates on top.

• South slopes (facing) expose more stone than west slopes (right).
  South slopes (facing) expose more stone than west slopes (right).
• A similar effect happens with frozen peaks, but with packed ice instead.
  A similar effect happens with frozen peaks, but with packed ice instead.

Badlands terracotta

All Minecraft:badlands biomes have more complex surface algorithms.

• Deep water generates as usual Template:In with one Minecraft:gravel layer above Minecraft:stone, or entirely stone Template:In.
• Shallow water replaces the top layer with Minecraft:white terracotta Template:In only.
• The following above-ground terrain is covered with one red sand layer followed by some Minecraft:orange terracotta layers.
  • Floating red sand is replaced by red sandstone.Template:Only
• Above roughly Y=74, the top-most layer is replaced by Minecraft:terracotta alternating using noise with hoodoo terracotta. The first layers below are always hoodoo terracotta.
• Above Y=256, orange terracotta replaces hoodoo terracotta, visible only in Minecraft:amplified worlds.

"Hoodoo terracotta" is generated as follows. Each world seed generates 192 layers of random stained terracotta colors (red, orange, yellow, brown, white, and light gray), corresponding to the Y-coordinates above Y=63. At each horizontal coordinate, each layer may shift up and down by at most 7 blocks based on noise, creating unique variation.

• Lower parts of a badlands biome generate with red sand, terracotta, and stone underwater.
  Lower parts of a badlands biome generate with red sand, terracotta, and stone underwater.
• Hoodoo terracotta at a badlands plateau
  Hoodoo terracotta at a badlands plateau
• When viewed from the side, terracotta colors are often organized in layers
  When viewed from the side, terracotta colors are often organized in layers

Swamp marshland

In Minecraft:swamps and Minecraft:mangrove swamps, a noise creates variation near the sea level. At layer Y=63, the surface materials are sometimes replaced by Minecraft:water, which can extend slightly deeper in mangrove swamps. This creates some undeep marshland in the terrain that already alters between shallow water and flat land a lot.

• A wider area of swamp marshland
  A wider area of swamp marshland
• In a mangrove swamp, the marshland creates shallow lakes everywhere.
  In a mangrove swamp, the marshland creates shallow lakes everywhere.

Erosion

Template:Main Template:Exclusive When the surface depth is less than or equal to 0, the top layer is stripped away, exposing the layers below all surface blocks, ususally Minecraft:stone. In badlands, they are made of Minecraft:orange terracotta. Erosions in frozen oceans occur at the freeze layer and replace it with air, followed by Minecraft:ice or Minecraft:water below.

Commonly, minerals can be found in these, generally Minecraft:coal ore and Minecraft:iron ore. Due to a bug, they do not generate Template:In.

• A naturally generated erosion
  A naturally generated erosion
• A desert erosion
  A desert erosion
• A taiga erosion
  A taiga erosion
• A snow-covered tundra erosion
  A snow-covered tundra erosion

Hoodoo

Hoodoos are tall spike-like structures found in badlands at the red sand level. While this structure is found exclusively in Minecraft:eroded badlands, all badlands biomes actually have this structure, but set to false except for eroded badlands. Hoodoos are entirely made up of hoodoo terracotta, making it occur at much lower altitudes, although they can reach more than 100 blocks tall.

• Hoodoos in the eroded badlands
  Hoodoos in the eroded badlands
• Many hoodoos in a single biome world
  Many hoodoos in a single biome world
• Hoodoo render
  Hoodoo render

Iceberg

An iceberg is a large terrain feature composed of Minecraft:packed ice and Minecraft:snow blocks.

Large icebergs generate in Minecraft:frozen oceans and Minecraft:deep frozen oceans. They consist of Minecraft:packed ice, and can be topped with snow blocks. Icebergs generate in a wide variety of shapes and sizes, ranging from small islands to giant mountain-like icebergs. They can also generate with cave-like holes (these might be related to the carved recesses in cone icebergs)Template:Info needed in them, which sometimes pass through to the other side of the iceberg.

There are often blue ice features attached to them.

• A group of naturally generated icebergs
  A group of naturally generated icebergs
• An aerial view of a frozen ocean with icebergs
  An aerial view of a frozen ocean with icebergs
• An iceberg viewed from below
  An iceberg viewed from below
• A cave inside an iceberg
  A cave inside an iceberg

Noise cave

Noise caves are generated using a noise. They come in the form of cheese caves, spaghetti caves, and noodle caves. By adjusting noise frequency, hollowness (for cheese caves), and thickness (for spaghetti caves, noodle caves, and noise pillars), noise caves can vary in extremely diverse ways. When generating noise caves, the game firstly generates a random noise field, and "smudges" it using a mathematical trick called Perlin noise. These processes then result in a 3D noise image.

Unique features of noise caves are aquifers. Bodies or Minecraft:water or Minecraft:lava may form at different altitudes, separated from other bodies by thin walls or ceilings.

Larger noise caves may feature noise pillars, formations of rock connecting the ceiling with the floor based on noise, which can have varying sizes.

Some noise caves may also reach the surface, exposing stones or creating floating islands.

• A cheese cave with some aquifers
  A cheese cave with some aquifers
• Noodle cave
  Noodle cave
• Spaghetti cave
  Spaghetti cave
• Some aquifers
  Some aquifers
• Pillars in a noise cave
  Pillars in a noise cave

Carvers

Minecraft:Carver caves are narrow, winding tunnels similar to noise caves, but with a clear end and a central starting room. They can generate at any altitude and connect to the surface, other caves, or structures. Sometimes, carver caves are filled with water or lava.

Minecraft:Canyons are similar to carver caves, but shaped like a tall ravine and relatively shorter. Canyons may generate entirely underground, underwater, or exposed to the surface, and they can have different sections similar to aquifers. The walls of a canyon are steep cliffs with some edges and natural variation. They can also reach the lava level.

• Carver caves
  Carver caves
• A canyon from the inside
  A canyon from the inside
• A canyon exposed to the surface
  A canyon exposed to the surface

Ore veins

Unlike ore features, ore veins are terrain features that carve through the world and place several blocks. There are two types: veins with copper ore, Minecraft:granite as filler material, and occasional raw copper blocks, forming in the Minecraft:stone layer, and veins with Minecraft:deepslate iron ore, Minecraft:tuff as filler, and some raw iron blocks, forming in the Minecraft:deepslate layer. Ore veins are massive branching networks, sometimes exposed in a cave, but they cannot replace air or water.

• An iron vein in a cave
  An iron vein in a cave
• Exposed copper vein
  Exposed copper vein

The Nether

General terrain generation

Template:Main Terrain in the Nether is generated similarly to the Overworld with 3D Perlin noise. Instead of surface-oriented parameters, the game has two pairs for the solid terrain at the ceiling and ground, and the hollow space in between. This results in cave-like terrain where most air is found in the middle between the ceiling and the ground.

Floating islands, cliffs, and overhangs are common.

Lava sea

Similar to the water sea level in the Overworld, a Minecraft:lava sea forms below Y=31 in Minecraft:the Nether, which happens quite often. They can stretch for hundreds of blocks in any direction, and are usually bordered by Minecraft:netherrack, or occasionally Minecraft:soul sand, Minecraft:gravel, and Minecraft:magma blocks. Minecraft:Striders can spawn in lava seas.

Unlike with Minecraft:Overworld oceans, lava seas are not handled as a biome. Template:IN, the lava sea is biome-dependent and can also be generated in the Overworld, replacing the water sea.

• The lava sea
  The lava sea
• A few Minecraft:ghasts swimming in a lava sea
  A few Minecraft:ghasts swimming in a lava sea
• Under the lava sea in Minecraft:Spectator mode
  Under the lava sea in Minecraft:Spectator mode

Surface

Template:For Based on the depth value calculated by the terrain generation, the Minecraft:biome, and the dimension, the world is "filled" with several blocks in layers.

Terrain

All blocks that make up the terrain are placed depending on the dimension and altitude. In the Nether, this is as follows:

• Template:BlockLink: Template:IN, one full layer at Y=0, followed by a randomized gradient that places bedrock up to layer Y=5. Template:IN, two full layers at Y=0 and 1, followed by a noise that randomly places bedrock up to Y=4 meaning that they cannot generate "floating", and the pattern is always the same regardless of Minecraft:world seed. The bedrock layers cannot be overridden by other terrain features.
• Template:BlockLink: Another layer of bedrock generates similarly at the Minecraft:Nether roof. This is one full layer at Y=127, followed by a gradient,Template:Only or noiseTemplate:Only that places blocks down to Y=122/Template:Only123.Template:Only
• Template:BlockLink generates anywhere else as terrain block.

Nether erosions

Template:Main In the Nether, erosions generate the same size and shape as they do in the Overworld. Unlike their Overworld counterparts, however, Nether erosions replace the ground with Minecraft:netherrack instead of stone. Nether erosions can also expose ores, mainly Minecraft:Nether quartz ore and Minecraft:Nether gold ore.

Notably, erosions generate independent of the y-coordinate; if an erosion generates in an overhang in the Nether, an identical erosion is guaranteed to generate at the exact same x and z coordinates on the ground below such an overhang.

• An erosion in a Minecraft:crimson forest, exposing Nether quartz ore blob.
  An erosion in a Minecraft:crimson forest, exposing Nether quartz ore blob.
• An erosion in a Minecraft:Nether wastes.
  An erosion in a Minecraft:Nether wastes.

Nether carvers

Minecraft:Carver caves and Minecraft:canyons generate similarly in the Nether as how they do in the Overworld. Below Y=31, they are filled with lava Template:In. Template:IN, they are filled with air and some biome features, and are separated from the lava sea by walls. They can often expose Minecraft:bedrock, but not at the ceiling.

• Nether carver caves
  Nether carver caves
• A Nether canyon
  A Nether canyon
• A carver cave connecting to the bedrock in Template:BE
  A carver cave connecting to the bedrock in Template:BE

The End

Central island

The center of the End is a large, asteroid-like island composed entirely of Minecraft:End stone, floating in the void. It features the Minecraft:exit portal in the center, surrounded by 10 Minecraft:End spikes in a circle. The island is home to the Minecraft:ender dragon, and serves as the arena where it is fought.

At a distance of 1000 blocks away, an endless expanse of additional islands begins, away from the main island. These consist of large islands, about the size of the main island, and smaller ones, which are usually thin and small.

• Central island with many endermen.
  Central island with many endermen.

Outer islands

The outer End islands are found 1000 blocks away from the central island, also made entirely of End stone. They vary in size from large islands to smaller "mini islands". Generated structures such as End cities and End ships spawn here, along with Minecraft:chorus trees and erosions. The player can be taken to the End islands through the Minecraft:End gateway.

• Outer islands with chorus trees.
  Outer islands with chorus trees.

End erosions

Template:Main Erosions generate in the End as they would in the Overworld and the Nether, but they never expose any ores. End erosions may generate on both the central island and outer islands, and Minecraft:chorus trees can occasionally take root in the erosions.

• An erosion generated on an outer End island.
  An erosion generated on an outer End island.

History